The Industry's Best Eco-Friendly Arrow Paints
Features
- 100% waterborne technology
- Very low odor and no VOC
- High hiding, great coverage and flow, adheres to any arrow (wood/aluminum/carbon)
- Very tough and durable
- High gloss exterior-grade finish
- Cleans up with soap & water
Always clean carbon shafts prior to cresting or crown dipping. There is no need to clear dip over but it is recommended. Add water to achieve personal brushing desire, usually dries in 1 hour much faster with thin coats.
Packaged in PINT containers.
*** PLEASE NOTE*** WHEN USING NEW PRODUCTS LIKE THE TRUE NORTH ARROWS ECO-FRIENDLY CRESTING PAINTS-CROWN DIPPING PAINTS- CLEAR ARROW & BOW FINISHES& FLETCHING ADHESIVE;THERE IS A SLIGHT LEARNING CURVE TO THE PRODUCTS. THEY ARE DESIGNED TO BE USED SIMILAR TO THE PRODUCTS OF YESTERYEAR.THESE PRODUCTS ARE THE NEXT GENERATION OF FINISHES & DESIGNED FOR THE CONSUMER & PROFESSIONAL FOR RESULTS. IF YOU HAVE ANY QUESTIONS PLEASE REFER TO THE INFORMATION SECTION ON THE WEB SITE OR CONTACT ME @ [email protected]
Stir the TRUE NORTH ARROWS CROWN DIP paint well, then add to the tube, then I run a old shaft up and down until the paint flows off with no bubbles,they will pop fast. Leave your self room to add more water so as it runs off nicely, usually I dip 2 or 3 time, just finished 1 st dip on a set tonight,( you can dip over bare shaft or stain it will bond no problems just make sure your stain dries 24 hours) let it dry at least 4 hours before re coating, with the cresting paints only thin if you want to , also they do not need to be clear dipped over(unless it is metallic silver/gold then clear over for protection, YOU CAN USE THE GLOSS or SATIN CLEAR ARROW FINISH OVER THE CROWN DIP/CRESTING PAINTS IF YOU WANT A EVEN SHEEN.
THANK YOU FOR YOUR BUSINESS.
